Imininingwane enzuzo
Inani (izinto):1000
Ukhomba olukhulu:80 kg
Ubukhulu:L(600)*W(500)*H(300) cm
Ukhomba olungekho:75 kg
Indlela yokuthumela:Ukuthutha ngomhlaba, ukuthutha ngolwandle
inombela yokucaciswa:IDW-2400
Inombolo yemithombo:IDW-2400
Incazelo yeziphakethe:Ukupakisha ngamabhokisi ayenziwe ngokhuni
Ukubonisa umlingani
Izinzuzo zeMishini Yokushisela Ephikisana Namandla Ye-Medium Frequency Inverter:
Ukuqhathaniswa Nemishini Ejwayelekile Yokushisela ye-AC Line-Frequency
| Isigaba | Ushunqulelo oluqhelekileyo lwe-AC olusekelwe kumaza ombane | Isilawuli Samandla Kagesi Esimaphakathi Esimaphakathi |
|---|---|---|
| Ukusebenza | Imishini yokushisela ye-AC ejwayelekile ye-line-frequency ilungisa okukhiphayo kwesibili kwe-transformer yokushisela ngokushintsha i-thyristor firing angle. Njengoba i-transformer ixhunywe ngqo kugridi nge-thyristors, i-power factor iphansi. Isikhathi sokulungisa sama-line-frequency controllers side kakhulu (20 ms kumagridi angu-50/60 Hz). | Isilawuli se-DC esiguquguqukayo esiphakathi-frequency siguqulela i-AC yezigaba ezintathu ibe yi-DC, emva koko siphumelele itrafosomthetho yokutshiza nge-IGBT inversion. Ngomlinganiselo omkhulu wamandla, i-frequency ye-inverter yayo yi-1 kHz, kwaye ixesha lokulungisa lifinyelela kwi-1 ms – 20 amaxesha ngokukhawuleza kunezilawuli eziqhelekileyo. Inika ukuchaneka okuphezulu kokulawula, impendulo ekhawulezayo, kunye nokuphuma okuzinzileyo. |
| Igridi Yamandla | I-voltage engenayo yi-single-phase 380V, okubangela ukuthi amanye ama-phase adonse ugesi omkhulu kanti omunye adonse ugesi ongabikho. Lokhu kwenza i-three-phase grid ingalingani, okuholela ekusebenziseni okuncane kwe-grid, amandla aphezulu angasebenzi, kanye nokungcola okukhulu kwe-grid. Imishini eminingi idinga ama-transformer amakhulu, okwandisa izindleko zamakhasimende. | I-voltage yokufaka ingeyezigaba ezintathu 380V, enengxubevange yamanje ezintathu ezilinganisiwe nokusetshenziswa okuphezulu kakhulu kwenethi. Ukusebenzisa ukuqondisa kabusha okugcwele kwamagagasi amathathu, isici samandla sifike ngaphezu kuka-90%. |
| Ulawulo Lwamandla | Abaphathi abavamile balungisa ukushisa okushisayo nge-thyristor firing angle. Ukuwela uqweqwe kwamanje kubangela ukushisa okungenalutho, ukugxila okungalungile kokushisa, kanye nekhwalithi yokushisa engazinzile. Izikhathi ezinde zokuwela uqweqwe ziba nomthelela omubi. Ukuhluka okukhulu kwe-voltage yenethi kubangela ukushintshashintsha kwamanje, okuthinta kakhulu ukuzinza. I-inductance yesekethe yesibili nayo inomthelela omkhulu ekushiseni okushisayo. | Umjikelezo wokuhlanganisa ungowokuhlanganisa, ngaphandle kokweqa kwe-zero. Ukushisa kugxilile kakhulu, ukulahleka kokushisa kuphansi, futhi isikhathi sokuhlanganisa sincishisiwe, kuholela ekongeni amandla okukhulu. Akukho amanani aphezulu e-AC, ngakho akuthinteki ukushintsha kwegridi, kunciphisa ukuhamba nokwandisa impilo ye-electrode. I-inductance ye-circuit yesibili ayinayo almost umthelela kumjikelezo wokuhlanganisa, ikhipha ukulahleka kwe-loop yesibili. |
| I-Transformer | Kuhlomele ngama-transformers asebenza ku-50/60 Hz. Ngamandla afanayo, ama-transformers omugqa wokushintshashintsha amakhulu, ayisidina, alahlekelwa amandla, futhi awasebenzi kahle. | Ifakwe ama-medium-frequency transformers asebenza ku-1 kHz. Ngokulinganayo kwamandla, zincane kakhulu, zinokulahlekelwa okuphansi, ukusebenza kahle okuphezulu, nokufakwa okulula. |
Ngaphezu kwezinzuzo ezibalulwe ngenhla, imishini yokushisela ye-medium-frequency inverter inezinye izinzuzo eziningi, okubandakanya ububanzi bezimo zokushisela, ukuhambisana nezinto ezahlukahlukene (imishini ye-medium-frequency ingashisela izinsimbi eziboshwe, izinsimbi eziboshwe nge-galvanized, insimbi engagqwali, i-aluminium, kanye nezinsimbi ezingafani), kanye nezici zokushisela ezihlanganisiwe, okuholela ekusetshenzisweni okubanzi embonini.
1. Izici Zesilawuli
- Ugesi wokuphuma: 1K-4K HZ, ukunemba kwesikhathi ezingeni le-ms
- I-Programmable kuze kube yizinkulungwane eziyi-32 ze-welding specifications
- Inqubo yokushisa emithathu: ukushisa ngaphambi, ukuwelding, ukushisa; isigaba sokuwelding sivumela ukwenziwa ngokwezifiso kokukhuphuka/kwehla kanye nezibalo zokuphindaphinda
- Izikhala zokuphuma ezihlelwe: ukuphuma okwenziwe ngezinyathelo ezi-3 ukuze kuhlangabezane kangcono nezidingo ze-PLC, ama-robot, njll.
- Ukuxhumana nokulawulwa kwe-BCD: kuxhunywa kwi-PC yezezimboni, i-PLC, njll., ukuze kulawulwe kude nokuphathwa okuzenzakalelayo
- I-coil yesibili ibuyisela umjikelezo wokuhlanganisa ngesikhathi sangempela sokulawula ukujikeleza, iqinisekisa ukulawulwa okuqondile kwamandla
- Umsebenzi wokurekhoda i-alamu ukuze kube lula ukufinyelela ulwazi lwe-alamu lomlando
- Ukunemba kokulawula kwamanje: 5‰
2. Amapharamitha Esilawuli Esiyisisekelo
- Isilawuli Sokubhekelela Okumaphakathi Kwesikhathi Esiphakathi kwe-DC Series IDW
Imodi ye-Inverter I-Medium Frequency DC Imodeli DW400L IDW-600T IDW-800T IDW-100T IDW-1200T IDW-1800T IDW-2400 I-volteji yokufaka (V) I-Three-phase 380V, ukushintshashintsha kwe-voltage +10%, -20%; i-frequency 50HZ/60HZ±1% I-Max Output Current(A) 400A 600A 900A 1100A 1300A 1800A 2400A I-Transformer Efanayo 90KVA 120KVA 180KVA 200KVA 250KVA 350KVA 350*2KVA Ubukhulu besekethe emfushane (KA) 20KA 30KA 40KA 50KA 60KA 72KA 96KA Umthamo woMbane woMoya 100A 100A 125A 160A 160A 200A 400A Ububanzi Besilungiselelo Samanje 0-400A/0-20KA 0-600A/0-30KA 0-900A/0-40KA 0-1000A/0-50KA 0-1300A/0-60KA 0-1800A/0-72KA 0-2400A/0-96KA Indlela Yokulawula Ukwelashwa Okungaguquki Kwamanje / Okungaguquki Kwe-Conduction Angle Inombolo Yama-valve Omoya Izimodeli ezijwayelekile zihlomele ngama-valve omoya angu-4, kanti izinjini zokushisela zihlomele ngama-valve omoya angu-10. Imvamisa Ye-Inverter 1K/4K HZ I-Solenoid Valve Rated Output Voltage(V) DC24V±10% Isilinganiso Samandla Okukhipha weSolenoid Valve (A) ≤0.15A nge-channel Imodi Yokuxhumana Rs485 I-Maximum Welding Specification Amaqembu angu-32, angandiswa abe ngamaqembu angu-256 Imfuneko yamanzi okupholisa 6L/min, ≥0.15Mpa, izinga lokushisa ≤40℃ 8L/min, ≥0.15Mpa, izinga lokushisa ≤40℃ 12L/min, ≥0.15Mpa, izinga lokushisa ≤40℃ Izinga Lokusebenza(℃) Ukupholisa ngamanzi -5℃~50℃ Umswakama Wendawo ( % ) ≤80% Indawo Yokusebenza (Km) 1 I-Class Insulation Ikilasi F Ubukhulu Besakhiwo (mm) Okujwayelekile (kungashintshwa ngokucela) - Izimo Zokusebenza
I-Parameter Incazelo / Inani Isignali Yokuqala Isiqalo 1, Isiqalo 2 Ukuqhuba Valvu yeSolenoidi Amaqembu ama-3 Ukugcinwa kwenkqubo yokutshiza Amasethi angu-32 Isikhathi se-Pre-pressure (ms) 0-9999 Isikhathi Sokucindezela (ms) 0-9999 Isikhathi Sokukhuphuka (ms) 0-99 Isikhathi Sokushisa Ngaphambi Kwesikhathi (ms) 0-999 Isikhathi Sokupholisa (ms) 0-9999 Isikhathi Sokushisela (ms) 0-999 Isikhathi Sokupholisa (ms) 0-9999 Isikhathi Sokushisa (ms) 0-999 Ixesha lokuhla (ms) 0-99 Isikhathi Sokubamba (ms) 0-9999 Isikhathi Sokuphumula (ms) 0-9999 Ukulawulwa Kwamandla Ugesi 1 CC1 (I-Primary Constant Current) Ugesi Wokuqala 0-9999 (Iyunithi: A) CC2 (Ugesi Ongaguquki Wesibili) Ugesi Wesibili 0-99.99 (Iyunithi: KA) Ugesi Wamanje 2 CC1 (Ugesi Ongaguquki Wokuqala) I-Primary Current 0-9999 (Iyunithi: A) CC2 (I-Secondary Constant Current) Ukwelashwa Kwesibili 0-99.99 (Iyunithi: KA) I-Current 3 CC1 (Ugesi Ongaguquki Wokuqala) Umjikelezo Wokuqala 0-9999 (Iyunithi: A) CC2 (Secondary Constant Current) Isikhathi Sesibili 0-99.99 (Iyunithi: KA)
3. Incazelo Yephaneli Yokulawula
- Isikrini sokuthinta soshishino esiyi-7-intshi sokuseta iiparameter kunye nokukhetha imisebenzi, ukubeka iliso ngexesha langempela kwangoku okutshizayo, i-voltage ye-capacitor, njl.lonke uhlobo lokusebenza lungaqedwa kwisikrini sokuthinta.
4. Imiyalelo yokusebenza komlawuli
- Isingeniso Sokubonisa:Ngemuva kokuvula amandla, ingena ngokuzenzakalelayo esikrinini se-Working Status; ukuwelding kungase kwenziwe kuphela kulolu skrin.
- Isikrini sokulungisa ipharamitha: sokulungiswa kwamapharamitha okushisela
- Isikrini sokusetha umsebenzi: okukodwa/okuqhubekayo, ukuhlanganiswa kwe-seam, umjikelezo wokuqala/ wesibili ongu-constant, ukuhamba kwamanzi/ukuhlola izinga, ukulungisa, ukuhlanganisa okuphindaphindiwe, njll.
