Imininingwane enzuzo
Inani (izinto):10000
Ukhomba olukhulu:45 kg
Ubukhulu:L(70)*W(38)*H(68) cm
Ukhomba olungekho:33 kg
Indlela yokuthumela:Ezokuhamba ngomhlaba, ezokuhamba ngolwandle
inombela yokucaciswa:Input Power Voltage:3~380V±10%/50/60HZ, DutyCycle:500A 60%/400A 100%,Iout:20A-500A, Water-cooled
Inombolo yemithombo:400DP
Incazelo yeziphakethe:1. Kuhlanganiswe ebhokisini eline-foam evimbela ukushaqeka. 2. Uhlu lwezinto ezihambisana nazo: Umthombo wamandla wokushisela, isidlisi sezintambo, isibhamu sokushisela se-CO₂, ikhebula lesibhamu elingu-5m, ikhebula lomhlaba elingu-3m, ikhebula lamandla elingu-2m, isikrufu, isilinganisi sokugeleza kwe-CO₂.
Ukubonisa umlingani
Umshini Wokushisela we-Pulse we-MIG MAG TIG Series: MIG-400DP
1. Izici Zomkhiqizo:
• Idizayini ye-IGBT module enokuzinza nokwethembeka okuphezulu kakhulu.
• I-arc ezinzile yokushisela i-MIG, ukudluliswa kwamaconsi okuvamile nokwakheka okuhle kokushisela.
• Ukuchitheka okuncane nokuhle ngaphandle kokunamathela ensimbi ekushiseleni nge-MAG, konga umsebenzi nezindleko zokuhlanza futhi kwandise isikhathi sokusebenza sombhobho.
• Kuze kube yizinhlelo eziyikhulu zochwepheshe bokushisela, okonga kakhulu isikhathi sokusebenza futhi kuthola umphumela wokushisela osebenza kahle.
• Ifakwe umsebenzi we-double pulse nokulawula okuhambisanayo ukuze kutholakale ukushisela okuphelele kwe-fish scale nokuthuthukisa ikhwalithi yokushisela.
• Ingasetshenziswa ne-generator futhi ilungele ukwakhiwa endaweni yomsebenzi.
• Ukuvikelwa okuhlakaniphile okuphelele kwamandla okuqinisekisa impilo ende yomshini.
2. Imisebenzi:
• I-MIG/MAG Single PulseMIG.
• I-MIG/MAG Synergic Control.
• Ukulawulwa Okuhlukile kwe-MIG/MAG.
• Ukushisela Ngentambo Yensimbi Evikelwe.
3. Izinhlelo zokusebenza:
• Isebenza ekushiseleni izinsimbi ezinjenge-stainless steel, i-carbon steel, i-alloy steel, i-aluminium nama-aluminium alloys.
4. Imininingwane Yobuchwepheshe:
| Into | Inani | |
|---|---|---|
| I-Voltage Yokufaka (V) / I-Frequency (Hz) | 3~380V±10% / 50/60HZ | |
| Amandla Okufaka Akalwe (KVA) | Ukushisela nge-MIG | I-SMAW |
| 24 | 25 | |
| I-Rated Input Current (A) | 45 | 47 |
| I-No-load Voltage (V) | 92 | 14 |
| Umsinga Wokushisela (A) | 20~500 | |
| I-Welding Voltage (V) MIG Welding | 14~50 | |
| Umjikelezo Womsebenzi (%) | 500A 60%; 400A 100% | |
| Isici Samandla | 0.9 | |
| Ukusebenza Kahle | ≥85% | |
| I-Insulation Class | H | |
| Izinga Lokuvikelwa | IP21S | |
| Ububanzi Bocingo (mm) | 0.6---1.6 | |
| Isisindo (kg) | 32.5 | |
| Ubukhulu (mm) | 670*325*605 | |
5. Izindlela Eziningi Zokusebenza:
• Imodi yokushisela yochwepheshe eyenziwe ngokwezifiso: yokushisela okusheshayo nokushisela okusheshayo kwemithungo emifushane. Izici zalemodi zihlanganisa ukushaya i-arc ngokushesha, ukushisela ngokushesha, ukushisela kuqala lapho iswishi icindezelwa futhi kuyame lapho ikhululwa, ngesigqi esiphezulu sokusebenza nokusebenza okuphezulu.
• Imodi Ejwayelekile: Le modi ifanele izidingo zokushisela ezijwayelekile. Kule modi, imingcele ehlukahlukene yokushisela ingasethwa ngokukhululeka nangokunembile ngokuya ngezinqubo zokushisela nemikhuba yokusebenza. Imodi yokulawula ngokuhambisana iyatholakala, lapho i-voltage yokushisela ihambisana ngokuzenzakalelayo lapho kulungiswa i-current.
• Imodi ye-SMAW: Imodi ye-“SMAW” ingashintshwa ngemenyu ye-P, futhi kusetshenziswe ama-electrode anobubanzi obungu-5.0mm ubukhulu, asebenza kuma-electrode ahlukahlukene ane-asidi nawune-alkali. Le modi ifanele imisebenzi yokushisela amabanga amade, ukulungisa nezinye izimo.
6. Izinzuzo Ezikhethekile Zokushisela i-Aluminium:
• Ifakwe imodi ye-pulse, efanele ukushisela amapuleti e-aluminium aphakathi nendawo namanzi; i-double pulse.
• Imodi ifanele ukushisela kwepuleti elincanyana nokushisela okuqondile.
• Umsebenzi wokulawula ubude be-arc ungakwazi ukulungisa ukukhishwa kokushisa kwe-arc ngokushintsha ubude be-arc.
• Isebenza kabanzi ekushiseleni i-aluminium ethambile (i-aluminium-silicon) ne-aluminium eqinile (i-aluminium-magnesium).
• Isofthiwe ekhethekile yokushisela ingahlelwa ngokwezidingo zezinto eziyizingxube ze-aluminium ezikhethekile.
7. Uhlelo Lokondla Ucingo Olusebenza Kahle Kakhulu:
• Inika ukushaya kwe-arc okusheshayo ngokusebenzisa i-full digital encoder wire feeder kanye ne-algorithm yokulawula ethuthukisiwe.
• Iqinisekisa ukushaya kwe-arc okushelelayo ngokulandelayo ngokulawula ukuma komugqa wocingo ekupheleni kokushisela.
| Into | Inani |
|---|---|
| Isibonelo | 7.710RM.012 |
| Amandla Kagesi (V) | I-DC 24V |
| I-No-load Current (A) | ≤0.9 |
| Umshwalense Wamanje (A) | 3.5 |
| Isivinini Sokondla Ucingo (m/min) | 2~24 |
| Ugesi Wokuqala (V) | ≤2.5 |
| I-Wire Feed Roller Specification (mm) | Φ30*22*10, ifakwe ama-roller e-V-groove angu-1.0/1.2 |
| Imininingwane Yerola Yokucindezela Ucingo | I-roller yokucindezela eyisicaba evamile |
| Inkambu Yokujikeleza | Irola lokondla ucingo lijikeleza ngokwewashi lapho ucingo olubomvu luxhunywe esigxotsheni esihle |
8. Ukusebenza Okuhle Kwasendaweni Kwabasebenzisi:
• Ububanzi bokuzivumelanisa ne-voltage yokufaka bufinyelela ku-±25%.
• Amabhodi wesekethe neziphakeli zamandla eziyinhloko zisebenzisa umklamo ovikela uthuli.
• Izinga lokuvikela igobolondo lifinyelela ku-IP23S.
• Umjikelezo womsebenzi ophezulu ongu-100% ku-400A.
• Izingxenye eziyinhloko nezesibili ngaphakathi komshini wokushisela ziyimojula ngokugcwele, kuthuthukisa ukwethembeka.
• Isibonisi sedijithali esiyizingxenye eziyisi-7 esinencazelo ephezulu, esingakhombisa amandla kagesi namandla kagesi asethiwe, amandla kagesi wokushisela wangempela, amakhodi wephutha, isivinini sokondla ucingo, isikhathi neminye imininingwane.
• Kusebenzisa izinkinobho ezithintwayo ukuze kusethwe amapharamitha kalula.
9. Izinhlobonhlobo Zemisebenzi Ethuthukile Yokuklama Nokuphatha:
• Kusebenzisa i-processor enama-cores amane, i-algorithm yokulawula isofthiwe elungiselelwe kanye nokulawula i-pulse waveform ukuze kwenziwe i-arc yokushisela izinze kakhulu.
• Idatha yochwepheshe eyakhelwe ngaphakathi yobubanzi bocingo olungu-1.2/1.4mm, elungele ukushisela i-aluminium kusukela emapulangweni amancane kuya kwamakhulu.
• Ukushisela kwe-aluminium ye-MIG yekhwalithi ephezulu kungafinyelelwa kumapuleti amancane naphakathi nendawo.
• Inika ukushaya kwe-arc okusheshayo nokuqinile.
• Ingagcina futhi ibize amasethi ayi-100 wezimo zokushisela.
• Imikhawulo ephezulu nephansi yomsinga wokushisela ingasethwa ukuvimbela abasebenzi ekusebenziseni umshini ngaphezu kwemibandela.
10. Izici Ezinothe Zomoya Womlilo:
| Impahla Yocingo Lokushisela | Indlela Yokushisela | Igesi Yokuvikela | I-Pulse | Ububanzi Bocingo (mm) |
|---|---|---|---|---|
| I-Aluminium Eqinile | MIG | Ar (99.99%) | Akukho Pulse | 1.2, 1.6 |
| I-Aluminium Eqinile | Nge-Pulse | 1.0, 1.2, 1.6 | ||
| I-Aluminium Ethambile | 1.2, 1.6 | |||
| I-Aluminium Emsulwa | 1.2, 1.6, 2.0 (0P1) |
11. Imininingwane Yethangi Lokupholisa Amanzi & I-Trolley:
• Umthamo wamanzi ongu-10L ukuze abasebenzisi babe nokuthula okwengeziwe.
• Idizayini elula yokushintsha amanzi kalula.
• Umklamo omfishane futhi omuhle wenqola.
• Izinto zekhwalithi ephezulu ezinokwakheka okuqinile nokuqhubekayo.
• Ukusunduza nokudonsa okushelelayo kwesondo, konga isikhathi, umsebenzi nokukhathazeka.
| Igama | Ithangi Lokupholisa Amanzi | I-Trolley |
|---|---|---|
| I-Input Voltage (V) | 380V | - |
| I-Frequency Elinganiselwe (Hz) | 50/60Hz | - |
| Ubukhulu (mm) | 670*325*300 | 1170*445*1170 |
| Isisindo (kg) | 17 | 22.1 |
12. Indlela Yokusebenza:
• Inkinobho yokulungisa/ukushintsha ipharamitha, Cindezela inkinobho ukuze ukhethe ipharamitha, Zungezisa inkinobho ukuze ulungise ipharamitha.
13. Ukusebenzisana Nobhobhoyithi:
• Ingahambisana kahle namarobhothi okushisela ukuze kutholakale ukukhiqiza okuzenzakalelayo nokuhlakaniphile.
14．Imiphumela Yokuhlolwa Kokushisela:
• Ukuhlolwa Okubonakalayo: Ubuso bokushisela bunomumo omuhle namalunga amahle, akukho ziphoso ezinjengemifantu, ukungahlangani okuphelele, izimbobo zomoya kanye nezintambo zokushisela ebusweni.
• Ukuhlolwa Kwemifantu Ye-Ultrasonic: Amasampula ahlolwa umnyango wekhwalithi ngomshini wokuhlola imifantu ye-ultrasonic, futhi amasampula awanazo iziphazamiso futhi ahlangabezana nezidingo zokufaneleka.
15. Uhlu Lokuhlelwa:
- Umthombo wamandla wokushisela,
- umshini wokufaka ucingo,
- Ithoshi lokushisela i-CO₂/MIG,
- Intambo yokuxhuma yethoshi engu-5m,
- Intambo yomhlabathi engu-3m,
- Intambo yokufaka ugesi engu-2m,
- Iseti yezikrufu ze-Allen,
- I-flow meter ye-CO₂.
- Ipayi Lomoya Eliqinisiwe
- Isiqinisekisi Sensimbi Engagqwali
Imininingwane yemithombo
