Imininingwane enzuzo
Inani (izinto):10000
Ukhomba olukhulu:34 kg
Ubukhulu:L(70)*W(30)*H(55) cm
Ukhomba olungekho:26 kg
Indlela yokuthumela:Ezomhlaba, ezolwandle
inombela yokucaciswa:Input Power Voltage:380V, DutyCycle:250A 60%/200A 100%,Iout:20A-250A
Inombolo yemithombo:280DP
Incazelo yeziphakethe:Ukupakisha ngebhokisi lekhadibhodi
Ukubonisa umlingani
I-MIG MAG TIG Series Pulse Welding Machine: I-MIG-280DP
1. Izici Zomkhiqizo:
• Inemisebenzi yonke ye-MIG-P series single pulse MIG welding machine.
• Kwehlisa ukuvela kwezimbobo ngesikhathi kushiselwa i-aluminium.
• Isebenzisa ukulawula okuphelele kwedijithali esheshayo, iqapha zonke izigaba zenqubo yokushisela, futhi ifinyelela ngokunembayo "i-pulse eyodwa idropi eyodwa", ngaleyo ndlela ithole ukushisela okuzinzile cishe ngaphandle kokufafaza.
2. Imisebenzi:
• I-MIG/MAG Single Pulse.
• MIG/MAG Double Puls.
• Ukulawula Okuhlanganisiwe kwe-MIG/MAG.
• I-MIG/MAG Separate Control.
• Ukushisela nge-Shielded Metal Arc.
3. Izicelo:
• I-MIG/MAG welding isebenza ezintweni ezifana nensimbi engagqwali, insimbi yekhabhoni, insimbi ye-alloy, i-silicon bronze, i-aluminum bronze, i-aluminum kanye ne-aluminum alloys.
4. Amaparamitha Obuchwepheshe:
| Into | Inani | |
|---|---|---|
| Amandla Kagesi Angenawo (V) / Imvamisa (Hz) | 3~380V±10% / 50/60HZ | |
| Amandla Okufaka Akaliwe (KVA) | Ukushisela kwe-MIG | SMAW |
| 11.5 | 12.7 | |
| Ugesi Okokufaka Okulinganiselwe (A) | 18 | 18 |
| Amandla Kagesi Angenamthwalo (V) | 88 | 89 |
| Ugesi Wokushisela (A) | 20~250 | |
| I-Voltage Yokushisela (V) i-MIG Welding | 13.5~265 | |
| Isikhathi Sokusebenza (%) | 250A 60%；200A 100% | |
| Amandla Okufaka (Power Factor) | 0.9 | |
| Ukusebenza kahle | ≥85% | |
| Isigaba Sokuvikela | H | |
| Isigaba Sokuvikela | IP21S | |
| Ububanzi Bezingcingo (mm) | 0.6---1.0 | |
| Isisindo (kg) | 26 | |
| Ubukhulu (mm) | 600*230*460 | |
5. Izindlela Zokusebenzisa Eziningi:
• Imodi yokushisela eyenziwe ngendlela efanele yochwepheshe: yokushisela okusheshayo nokushisela okusheshayo kwezindawo ezimfushane zokushisela. Izici zalemodi zihlanganisa ukushaya kwe-arc okusheshayo, ukushisela okusheshayo, ukushisela kuqala ngokushesha lapho inkinobho icindezelwa futhi iyayeka lapho ikhishwe, ngokushaya okuphezulu kokushisela nokusebenza kahle okuphezulu.
• Imodi Ejwayelekile: Le modi ifanele izidingo ezijwayelekile zokushisela. Kule modi, imingcele ehlukahlukene yokushisela ingasethelwa ngokukhululeka nangokunembayo ngokwemibandela yenqubo yokushisela kanye nemikhuba yokusebenza. Imodi yokulawula i-synergic iyatholakala, lapho i-voltage yokushisela ifaniswa ngokuzenzakalelayo lapho ulungisa.
• Imodi ye-SMAW: Imodi ye-"SMAW" ingashintshwa nge-P menu, futhi izintambo ezinobubanzi obukhulu obungu-5.0mm zingasetshenziswa, ezisebenza ezinhlotsheni ezahlukahlukene zezintambo ezine-acidic ne-alkaline. Le modi ifanele imisebenzi yokushisela emabanga amade, ukulungisa nezinye izikhathi.
6. Uhlelo Lwentambo Lokudla Olusebenza Kakhulu:
• Ikuvumela ukuthi uqale ukushisela ngokushesha ngokusebenzisa i-encoder yedijithali ephelele yokudlulisa intambo kanye ne-algorithm yokulawula ethuthukisiwe.
• Kuqinisekisa ukushaywa komnsalo okubushelela ngesikhathi esilandelayo ngokulawula ukuma komkhawulo wezingcingo ekugcineni kokushisela.
| Into | Inani |
|---|---|
| Imodeli | 7.710RM.012 |
| Amandla Kagesi (V) | DC 24V |
| Ugesi Ongenawo Umthwalo (A) | ≤0.9 |
| Umthwalo Wamanje (A) | 3.5 |
| Isivinini Sokudla Kwezingcingo (m/min) | 2~24 |
| Amandla Kagesi Eqalayo (V) | ≤2.5 |
| Ubungako Besondo Lokudlulisa Intambo Yokushisela (mm) | Φ30*22*10, ifakwe ama-roller we-V-groove angu-1.0/1.2 |
| Ukucaciswa kwe-Roller Yokucindezela Ucingo | I-roller yokucindezela eyisicaba jikelele |
| Isiqondiso Sokujikeleza | I-roller yokudla ucingo ijikeleza ngendlela ewashi lapho ucingo olubomvu luxhunywe kupholethi omuhle |
7. Izinzuzo Eziyinhloko Zempahla:
• Ibanga lokuzivumelanisa namandla okokufaka lifinyelela ku-±25%.
• Amabhodi esifunda namadivayisi amakhulu amandla asebenzisa umklamo ovimbela uthuli.
• Izinga lokuvikela ikhava lifinyelela ku-IP23S.
• Isilinganiso somsebenzi esiphakeme esingu-60%.
• Okuyinhloko kanye nesekondari ngaphakathi komshini wokushisela kuhlanganiswe ngokuphelele, kuthuthukisa ukwethembeka.
• Isibonisi sedijithali se-7-segment esicacile, esingakhombisa isikhathi samanje nesokushintsha, isikhathi samanje nesokushintsha sangempela sokushisela, amakhodi amaphutha, isivinini sokudla ucingo, isikhathi neminye imingcele.
• Kwamukelwa izinkinobho zokuthinta ukuze kusethwe kalula amaparamitha.
8. Izinzuzo Ezikhethekile Zokushisela i-Aluminum:
• Ngemodi ye-pulse, efanele ukushisela amapuleti e-aluminium aphakathi nendawo futhi aqinile; imodi ye-double pulse ifanele amapuleti amancane nokushisela okuqondile.
• Umsebenzi wokulawula ubude bomnsalo ungakwazi ukulungisa ukuphuma kokushisa komnsalo ngokushintsha ubude bomnsalo.
• Kusebenza kabanzi ekushiseleni kwe-aluminium ethambile (i-aluminium-silicon) ne-aluminium eqinile (i-aluminium-magnesium).
• Isofthiwe ekhethekile yokushisela ingenziwa ngokwezifiso ngezinto ezikhethekile ze-aluminium alloy.
9. Isiqinisekiso Sokuzinza Komlilo:
• Kwamukelwa iprosesa ye-quad-core, i-algorithm yokulawula isofthiwe elungiselelwe kanye nokulawula i-pulse waveform ukwenza i-welding arc izinzile.
• Idatha yochwepheshe eyakhelwe ngaphakathi yebanga lobubanzi bocingo obungu-1.2/1.4mm, elungele ukushisela i-aluminum kusuka kumapuleti amancane kuye kumapuleti amakhulu.
• Kutholakala ukushisela kwe-MIG ye-aluminum esezingeni eliphezulu kwamapuleti amancane naphakathi.
• Ibonisa ukushaya kwe-arc okusheshayo nokuzinzile.
• Ingagcina futhi ibize izinhlu eziyi-100 zemibandela yokushisela;
• Imingcele ephezulu nephansi yokushisela ingasethwa ukuze kuvinjelwe abasebenzisi ukuthi bangasebenzisi umshini ngaphandle kwezidingo.
10. Izici Eziningi Zomlilo:
| Impahla Yentambo Yokushisela | Indlela Yokushisela | Igazi Lokuvikela (Shielding Gas) | Impimpulusi | Ububanzi Bezingcingo (mm) |
|---|---|---|---|---|
| I-Aluminum Eqinile | MIG | Ar (99.99%) | Ayikho iPulse | 0.9, 1.0, 1.2 |
| I-Aluminium-Magnesium | MIG | I-Ar (99.99%) | Nge-Pulse | 1.0, 1.2 |
| I-Aluminum Ehlanzekile | MIG | Ar (99.99%) | Nge-Pulse | 1.0, 1.2 |
11. Indlela Yokusebenza:
• Ukulungiswa kwepharamitha/inqamu yokushintsha, Cindezela inqamu ukuze ukhethe ipharamitha, Jikelezisa inqamu ukuze ulungise ipharamitha.
12. Ukubambisana Nerobhothi:
• Ingahambisana kahle nama-robot okushisela ukuze kufezeke ukukhiqizwa kokushisela okuzenzakalelayo nokuhlakaniphile.
13. Imiphumela Yokuhlola Ukushisela:
• Ukuhlolwa Okubonakalayo: Indawo yokushisela inesimo esihle nezingxenye ezinhle, ngaphandle kweziphambeko ezifana neziqhekeko, ukuhlanganiswa okungaphelele, izimbobo zomoya kanye nemiqulu yokushisela ebusweni.
• Ukutholwa Kweziphazamiso Nge-Ultrasonic: Izibonelo zihlolwa umnyango wekhwalithi nge-ultrasonic flaw detection, futhi izibonelo azinawo amaphutha futhi zihlangabezana nezidingo zokufaneleka.
14．Uhlelo Lwenkonzo Ephelele Yokushisela:
• Nikeza ngenkonzo yokubonisana yamahora angama-72.
• Ukuxhumana nomuntu ochwepheshe ngamunye.
• Amanani acacile kanye namapharamitha ezinto zokusebenza.
• Phatha ikhasimende ngalinye ngokwethembeka nangokulunga, futhi uhlinzeke ngemikhiqizo namasevisi asezingeni eliphezulu.
• Phumeza imigomo yenkontileka ngokuqinile ukuze uvikele amalungelo nezintshisekelo zawo wonke amakhasimende.
• Hlala ngokuqinile kumazinga ekhwalithi yomkhiqizo futhi ubophezeleke kuyo yonke imishini ephuma efektri.
• Nikeza ngamavidiyo okufundisa ngomkhiqizo kanye neziqondiso zabasebenzisi.
• Nikeza isiqondiso esikude sokufakwa komkhiqizo, ukuthunyelwa emsebenzini nokusetshenziswa.
• Nikeza ngesiqondiso sokugcinwa komkhiqizo nokuhlinzekwa kwezingxenye ezilimele.
• 7×24-amahora okubonisana ngesevisi yokugcinwa.
Imininingwane yemithombo
